产品系列
气体净化设备
塑料辅机
厂房净化工程
      产品中心

中央供料系统


苏州华冠机电中央供料系统,经专业自动化系统工程设计,通过集中的管路系统将塑料原料从储料桶输送至中央干燥机,然后将干燥后原料输送至每一注塑成型机中,中央供料采用一台机一根输送管,密闭式回路设计,保证整个系统运行稳定,绝无塑料回潮,堵料现象发生。可配合中央干燥(除湿)系统,使用干燥空气对原料进行输送及再次干燥,防止塑料干燥后回潮,同时在每个输送循环后对输送管进行管道清理,确保管道内没有残余料,避免管道堵料的同时也保证加入注塑机中的原料一致性。在真空负压输送过程中,原料中的粉尘能通过粉尘过滤(集尘)系统过滤,提高成型产品的质量。
With professional engineering design ,the raw material is fed from shortage tank to be the central dryer,and then the dried material will be fed to each injection molding machine has its independent feeding pipe and designed as closed loop,therefore,the whole system will operate stably without dampening and blockage.You can also apply this systern together with the hopper dryer or dehumidifying dryer,by using the dry air to feed and re-dry the raw material for the purpose of avoiding the dried material from getting moist again . In order to ensure that there is no residual in the pipeline,you should clean it after every operating cycle.By doing this ,it can avoid dampening and keep material consistency.Under the action of subatmospheric pressure ,the dust in the raw material will be removed by the filter.Therefore,the quality of the mold will absolutely be improved.

应用范例  Example application
GMP(药品级)中央供料系统
光学级中央供料系统
中央除湿,供料,供粉系统
CENTER CONVEYING SYSTEM FOR GMP(PHARMACY)
OPTICAL CENTRAL CONVEYING SYSTEM
CENTRAL DEHUMDFYING SYSTEM MATERIAL
AND POEDER CONVEYING SYSTEM


苏州华冠机电设备有限公司 版权所有    苏ICP备15043255号
江苏省苏州市吴中区胥口镇新峰路518号
电话:0512-66313187  传真:0512-66313197  手机:13862588982