产品系列
气体净化设备
塑料辅机
厂房净化工程
      产品中心

HG模具控温机


(HG-MKW 系列水式模具控温机,HG-MKR 标准油式模具控温机,HG-MKR系列标准油(水)式模具控温机)
HG-MKR系列标准油(水)式模具控温机,主要应用于模具的加热与恒温。此外,尚可适用于其它有相同需求的领域。由油(水)泵加压经过电热管高温加热后送到模具,来达到加热与恒温的要求,其优化的设计使加热温度可达200℃(120℃),采用RKC温控表,可确保高性能的稳定温度控制,其温差控制在±1℃。
Huaguan oil(water) type mould temperature controller is mainly for heating and constant temperature for mould. It also can be used for the similar requirement range. Adopting indirect cooling type: mould returned oil(water) is cooled by cooler, and pushed by oil pump to be heated by pipe heater and then to be transmitted to mould to meet the requirement of heating and constant temperature. The optimal design makes the oil type mould heater heating reach 200±1℃,adopting the temperature control meter of RKC to make sure the stable temperature control。
本机特点 Features
采用台湾元新进口原装高温油泵,压力大,稳定性高,适宜长时间运转
Adopt oil pump made in Germany with features of big pressure and high stability.
多项安全装置,自动监测各种异常,并有相应指示
There are many safety devices to check machine abnormalities automatically, shown through indicator lights.
采用加热分段控制,大机型可临时作为小机型使用,可一机多用
Adopts digital RI.D. subdivision control temperature system .The big machine can be used as small size machine. One machine can be multi-used.

苏州华冠机电设备有限公司 版权所有    苏ICP备15043255号
江苏省苏州市吴中区胥口镇新峰路518号
电话:0512-66313187  传真:0512-66313197  手机:13862588982